Champion Sidecars DAYTONA 2+2 Specifications download pdf (Page 12)

( Fig D -1)

(Fig D -2)

(Fig E)

UPPER FRONT MOUNT

1.Remove the right side fairing panel by removing

the screws behind the side marker black trim and at

the lower trailing edge behind the plastic snap

cap. The tabs locate adjacent panels together so

each panel helps hold the other during final

assembly.

2.Remove the plastic grill from the radiator and if necessary relocate the

emission canister (fig E). The emission canister can alternately be located

inside the lower front fairing panel

just in front of the oil filter.

This is the easiest method but may

require the purchase of a longer

vacuum hose to reach the new

location. Loosen the fan box bolt

and top radiator bolt to gain

clearance around the frame tube for

the eye clamp. Spread clamp over

tube (Figure D -1) and rotate for

assembly. Torque clamp bolts to 10

ft. lbs. with nuts positioned toward

rear of motorcycle.

3. Position the eye clamp assembly

to point straight out from bike and

as high as possible (Figure D -1) and (Figure -F). Snug eye bolt by hand

until the lower panel is remounted and located correctly allowing for

alignment to the hole cut in the fairing (Figure F #1). For

(Fig F)

ease of front strut alignment, leave the eye clamp

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

No comments

Champion Sidecars DAYTONA 2+2 Specifications Page 12